Xinsu Global Electronic Co., Limited

Precautions for Use of Dehumidifier Adapter

1. When moving the dehumidifier adapter, do not tilt the unit more than 45 °C to prevent damage to the compressor.

2. The applicable temperature range of this machine is 5°C~38°C.

3. When the dehumidifier is working, the heat will be generated due to the compressor operation, so the room temperature will rise by 1~3 °C. This is a normal phenomenon, please feel free to use.

4. When the room temperature is below 10 °C and the ambient absolute humidity is quite low, it is not necessary to use a dehumidifier.

5. The air inlet and outlet should be separated from the wall to a distance of more than 500px to avoid affecting the dehumidification effect or causing malfunction.

6. The working environment, please try to keep the working place sealed so as to increase the dehumidification effect.

7. Do not use a dehumidifier adapter in places where you may be exposed to water or susceptible to chemicals.

8. Do not connect the unit with any relays, extension cords or adapters.

9. Do not place the unit near fire-heating equipment such as stoves and heaters, or in places subject to direct sunlight or wind and rain.

10. Use the dust on the power cord and then fasten the plug and place it in a stable place.

11. Do not damage or modify the power cord. Do not repair, disassemble or modify the unit yourself.

12. When draining continuously, please put the drain pipe so that the drainage is smooth.

13. Turn off the unit and unplug the power cord when a problem occurs.
Related Content
  • US DOE VI Efficiency Standard

    US DOE VI Efficiency Standard

    December 25, 2017DoE VI energy efficiency certification is an energy efficiency VI reports evaluated and issued by U.S. energy department. DoE VI energy efficiency is a standard for electric power resource utilization...view
  • Theories of chargers

    Theories of chargers

    August 1, 2018A 21v charger is judged by the battery voltage level, so how does the 21v charger automatically detect the battery voltage during charging? For example, to detect the battery voltage, we need to open ...view
  • Introduction of Battery Charger

    Introduction of Battery Charger

    August 1, 2018This article provides an overview of battery charging methods and modern battery technology to give readers a better understanding of the batteries used in portable devices. The chemical properties of...view
  • Installation and Debugging Process about Interchangeable Multi-plug Switch Power

    Installation and Debugging Process about Interchangeable Multi-plug Switch Power

    August 1, 2018Before assembling the switching power with interchangeable plug power adapter, please prepare various components, common tools, and auxiliary materials in accordance with the BOM list. If you use the ...view
  • Main types of Lithium-ion battery

    Main types of Lithium-ion battery

    June 26, 2018Lithium-ion batteries are classified into liquid lithium-ion batteries (Libified Lithium-Ion Battery, abbreviated as LIBs) and polymer lithium-ion batteries (Polymerium-Ion batteries, abbreviated as P...view
  • Lithium-Ion Charger Charging Process And Precautions

    Lithium-Ion Charger Charging Process And Precautions

    June 26, 2018Charging process1. The LED on the circuit board does not light when the power is not connected2. If power is connected to the circuit board, the green LED is on, and the circuit board waits for the li...view
  • TEL:+86-0755-29706858
  • FAX:+86-0755-29706858
  • EMAIL:sale@xinsuglobal.com
  • ADDRESS:3rd Floor No.1 Building A, Shenhuaye BaoAn Industrial Park, Xixiang Western Development Zone, Baoan District, Shenzhen City, Guangdong, China 518128