Xinsu Global Electronic Co., Limited

How to Maintain the 5V-24V Interchangeable Plug Power Adapter

How to maintain the interchangeable plug power adapter?

Interchangeable plug power adapter is common in our real life, which is used for language repeater and Walkman etc. These electrical appliances can be started-up and used normally through the power adapter transformation. If there is no power, these electrical appliances are just like a piece of waste iron and cannot be used. Please also maintain the power adapter when using it. When many friends use it and form the bad using habits, which cause the power adapter service life greatly shortened.

When you maintain the power equipment, it is necessary to have a deep understanding of it. Usually, the power adapter is marked with nominal voltage. What does the nominal voltage mean? The general nominal voltage refers to the output voltage, that is to say, the voltage without any load, without any output current.

General speaking, the common power adapter is the real no-load voltage, which is different from the standard voltage. So, the requirements for electronic components consistency is very high. However, in real life, if the power adapter wire is breaking and it is changed into a mismatched wire, which will have a certain influence on the switch power adapter.

When working, the same power adapter also can produce different temperature. If your power adapter produced lots of heat and you cooled down it with a wet cotton cloth, which is the wrong method. Too much water will cause the power adapter with a serious problem. In the face of such a phenomenon, first of all, please don't doubt your power supply with problems. What you should do is observing the device body. Whether there are two USB hard disks or not; whether the CPU run at full speed, etc. Please adjust it reasonably according to the task.

Related Content
  • Lithium battery charge and discharge

    Lithium battery charge and discharge

    June 26, 2018Lithium battery charging current and charging voltage are the two most important parameters in lithium battery charging. This is not only related to the charging performance of lithium batteries but a...view
  • Xinsu Global View in CES 2019

    Xinsu Global View in CES 2019

    March 1, 2019Xinsu Global Booth No.62503 in CES 2019Thanks for cusotmers visitingSome other Interesting products in CES 2019view
  • The Development Trend of Home Smart

    The Development Trend of Home Smart

    December 25, 2017According to the latest report, in the next 10 years, there is a huge market worth $14.4 trillion, mainly in the United States, Europe, China and Japan. The smart home will be the project that is clos...view
  • 13-16 Oct 2018 Hong Kong Electronics Fair (Autumn Edition) Booth No. 5C-D11

    13-16 Oct 2018 Hong Kong Electronics Fair (Autumn Edition) Booth No. 5C-D11

    August 1, 2018Welcome to visit us Booth No. 5C-D11 Hong Kong Electronics Fair ( Autumn Edition)Date: 13-16 Oct 2018Add: Hong Kong Convention and Exhibition Centre1 Expo Drive, Wan Chai, Hong Kong (Harbour Road Entr...view
  • Lithium-Ion Charger Charging Process And Precautions

    Lithium-Ion Charger Charging Process And Precautions

    June 26, 2018Charging process1. The LED on the circuit board does not light when the power is not connected2. If power is connected to the circuit board, the green LED is on, and the circuit board waits for the li...view
  • How to Use Lithium Batteries Correctly

    How to Use Lithium Batteries Correctly

    August 1, 20181. ChargingWhen you use the lithium batteries, please note that after a period of time, the battery will go into the dormant state. At this time, the battery capacity is lower than the normal value an...view
  • TEL:+86-0755-29706858
  • FAX:+86-0755-29706858
  • EMAIL:sale@xinsuglobal.com
  • ADDRESS:3rd Floor, No. 1 Building,C district,108 Honghu Road,Yanluo Street,Baoan District, Shenzhen,Guangdong, China 518127