Xinsu Global Electronic Co., Limited

What is Inrush Current

Inrush Current refers to the peak current of power equipment at the moment of power on. This "Inrush Current" will appear every time you turn on the power and then the current will come back to normal. Although it will not damage the power supply, we suggest not turning the power supply ON/OFF very quickly within a short time. Besides, if there are several power supplies turning on at the same time, the dispatching system of AC source may shut off and go into protection mode because of the huge inrush current. It is suggested starting these power supplies one by one or using the remote control function of switching power supply to turn them on/off.
Related Content
  • What is Ripple & Noise? How to Measure it?

    What is Ripple & Noise? How to Measure it?

    December 25, 2017It is a small unwanted residual periodic variation of the direct current (DC) output of a power supply which has been derived from an alternating current (AC) source. The wave form is shown as figure ...view
  • How To Choose A Switching Power Supply?

    How To Choose A Switching Power Supply?

    December 25, 2017To increase the reliability of the switching power supply, we suggest users choose a unit that has a rating of 30% more power than actual need. For example, if the system needs a 100W source, we sugge...view
  • What Are The Protections Of Overload Or Over-current?

    What Are The Protections Of Overload Or Over-current?

    December 25, 2017When current drawn exceeds the rating of the PSU, the protection circuit will be triggered to protect the unit against overload or over-current. Protections of overload or over-current can be divided ...view
  • TEL:+86-0755-29706858
  • FAX:+86-0755-29706859
  • EMAIL:sale@xinsuglobal.com
  • ADDRESS:3rd Floor, No. 1 Building,C district,108 Honghu Road,Yanluo Street,Baoan District, Shenzhen,Guangdong, China 518127